Color

Red

Type

Push-Twist-Release

Display

Stop

product series specifications

Pilot Devices:

Make / Break Rating: 7200VA (AC) / 69VA (DC)

Ith-Thermal Current: 10A (AC) / 2.5A (DC)

NEMA Rating: Type 1, 2, 3, 3R, 4/4X, 12, 13

IP Rating: IP66

Operating Temperature: -40 to +55°C / -40 to +131°F

AWG Conductor: 22-12 CU (Copper only – solid & stranded) [.5 – 4mm2] One or two wires permitted per termination

Recommended Torque: 7 – 10 Lb-in. [.8 Nm]

Mechanical Operations:

Momentary: 5,000,000

Maintained: 100,000

Dual: 1,000,000

Emergency Stop (EN418): 100,000

Selector Switch: 500,000

Contact Blocks: 5,000,000

Construction:

Operator Construction: Thermoplastic Polyester and Polyester Blends (UV)

Lens Construction: Polycarbonate (UV)

CAM and Bearing Parts: Polycarbonate (UV)

Seals: Neoprene gaskets, BUNA N – Rubber – Teflon coated, Thermoplastic – Elastomer molded seals

Push Pull Bearings: Brass (plated and unplated)

Detents for Maintained Devices: Brass (plated and unplated)

Springs: Stainless steel throughout

LED Voltage Tolerance: ±10%

Hours of Illumination (LED): 100,000

Enclosure:

Construction: Polycarbonate

Assembly Screw: Stainless steel

Gasket: Formed in place

Conduit Entries: 2 Lateral M20, (1/2 NPT) & 2 Base M16

Installation Torque (Cover to Base): 1 – 1.4 Nm [8 – 12 Lb-in.]

Operating Temperature: -40 to +55°C / -40 to +131°F

product series features

• Control stations available as standard pre-configured or custom assemblies
• Three enclosure frame sizes in up to three positions, and two colors; grey and yellow
• Horizontal and vertical conduit entry orientations
• A variety of operator styles and colors available in both non-illuminated and illuminated
• Multi-voltage and full-voltage light units in a wide range of voltages
• Legend plates available with a variety of designation options, including blank
• Fully assembled and read to use out of the box